Cutting discs provider in the UK: This magnetic drill is as close to perfection as they come with its 10 Amp motor and 2-speed setting. The DWE1622K is a unique blend of sophistication, power, and engineering. It is easy to use and offers you a ton of features to make metal drilling a breeze. These features include a quick-change chuck system that makes it possible for you to change between 3/4? Weldon Shank and 1/2? keyed chuck without using tools. The feeding handles can be placed on either side of the drill – also without using tools. With this drill comes a magnetic coolant bottle that you can place on either side of the drill press or even on the work surface. This allows for the required flow of coolant to ensure that your drill doesn’t overheat. This drill also comes with overload protection electronics that will switch off your drill to protect your motor. You will then have to wait until your drill cooled down with natural airflow before you will be able to continue. Welding Supplies Direct are proud to be the sole UK distributor for Paton MIG welding machines. Paton are a Ukrainian manufacturer of high quality welding sets and were responsible for manufacturing the first welding machines in spaces in 1984. Paton have a wide range of MIG welders including the PSI range which are compact, lightweight and feature packed, the PSI 160 is priced very well and beats every other “close competition” machine on practically every technical spec and has bags more features, too. Ask our sales team for more details! Discover even more information here https://www.weldingsuppliesdirect.co.uk/welding-equipment/mig-welders.html.
Important Industrial Gas Cylinder Safety Guidelines to Keep in Mind: Acetylene and oxygen are two industrial gases widely used across various industries. The cylinders accommodating these gases are designed with user’s safety in mind. However, that is not enough to ensure optimum safety in an industrial facility. The following factors will help ensure the same: Understand the Cylinder Properly: A personnel should be familiar with the potential risks and hazards associated with compressed gases while handling them. It is important to understand the properties of the gas filled within such as toxicity, flammability limits, and toxicity – Threshold Limit Value (TLV). Also, it is important to understand the hazards posed by gas at low temperature, high pressure or due to the physical state of the gas – non-liquefied or liquefied, etc. A personnel should read the contents of the label on the cylinder. If the label is missing or not easily readable, then the cylinder should not be used. In addition to improving a personnel’s understanding on oxygen cylinder safety or acetylene cylinder safety, he should be administered a proper plant safety training.
The S SATC PCS Metal Cutting Disc for Angle Grinder is made with a proprietary aluminum oxide grain combination that creates an aggressive cutting action. This allows the user to cut through materials more easily. In addition, the wheel also has a balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup. This means that you can cut through materials for longer periods of time without having to worry about the accuracy of the cut or the heat that is being generated. The SATC PCS Metal Cutting Discs will cut through most surfaces with ease and do not slow down as they work like other standard discs. These new discs also last much longer than other brands which allows you to make even more cuts before needing a replacement disc.
The Everlast Powermig 200 welder offers dual voltage inputs and weighs only 35 pounds due to inverter technology. It’s not only MIG-capable, you can also use it for flux core welding or as a stick welder. When your machine can stick weld and connect gas at the same time, all you need to buy is a connector block and you gain TIG ability too, although Everlast doesn’t say so. The Powermig 200 features a burn back control, automatically adjusting the wire length at restart. 200 amps can weld ?-inch steel in a single pass. Dual digital displays and a low-spatter arc control system are nice features in this price range. Preflow and Postflow improves weld quality, reducing porosity by starting the gas shield before the arc begins and cutting the gas off after the arc stops. The burn back control feature resets the length of the wire feed before you strike another arc. Another nice feature is the digital controls that give you a nice reading of exactly what your voltage and wire speed is. Everlast includes a gas regulator with this rig and backs it with a 3-year warranty. With stick capability and the ability to use it on either household or industrial power, this is quite a bit of welder for the money.
Look for ways to create more efficiencies in the welding process. This includes examining such things as wire diameter, wire feed speed, voltage, travel speed, gas type, transfer mode, etc. For instance, if the shop is currently welding with a short arc process and a 75/25 blend of shielding gas, it may be more effective to switch to a different gas and a spray mode of transfer. Or, a change in process may be warranted based on the condition of the part. If there is oxide on the part, it may be easier to change to a process that will overcome contamination problems rather than try to clean each part before welding. Your welding supplier should be up to date on the latest technology and be able to advise you on new processes, machinery and consumables that can optimize welding at the shop. In some cases, it may be better to double bevel a joint to prepare it for welding rather than single bevel it. It is recommended to double bevel any material that is more than 3/4″ in thickness. Just this simple change in procedure can save quite a bit in weld metal. On a 3/4″ thick piece, a double bevel will use 1.45 lbs. per foot of weld metal while a single bevel will use 1.95 lbs. per foot.
How to pick a welder tips: Fan on demand: Lowers running costs and reduces contamination to internal components. The fan kicks in when it’s needed, rather than running all day. Printed Circuit board protection: If the machine’s PCB’s are protected from dust & kept away from the fan, reliability will increase. Some manufacturers’ have the parts that need cooling in a duct type housing & the PCB isolated separately. Step voltage settings: If you’re looking at step voltage conventional MIG with multiple power settings – “the more the better!”
The 720 Watt, 6 Amp motor spins the cutting discs up to an impressive 11,000 rpm. That’s more than enough power output to get just about any job done with a 115 mm disc. Weighing in at less than 2 kg, it’s light enough to use one-handed if you’re brave enough. For two-handed use, there’s an indestructible plastic side handle that you can screw into either side. The thing I like about this handle is the 20° angle. You get a better grip for more precise grinding work, compared with standard right-angle grips. Another bonus feature found on this grinder is the soft start. For such a powerful bit of kit, it doesn’t feel like it’s going to jump out of your hand when you turn it on. And thanks to the anti-restart function, it’s safe to use as well.
A few tips on welding equipment, MIG and TIG welders, plasma cutters. ARC Welding : ARC welding is one of the oldest welding processes around. It uses either an AC or DC power supply to create an electric arc between the welding rod and the workpiece metal to melt the metals and join them together. This style of welding is relatively inexpensive and very portable but it does require some practice to get good consistent welds and the welds will probably require some arc weldercleaning up afterwards. ARC welding is less suited to welding thinner materials but there is a large range of specialist electrodes (welding rods) available for ARC welders depending on what materials you are welding. ARC welding is versatile but more suited to heavier applications.
Talking about the importance of soldering and welding is pointless if you already know about them. But, both of them have the drawback of emitting hazardous gases. Welding fumes contain considerable amounts of hydrogen fluoride gas, carbon monoxide, argon, and carbon dioxide. Also, the gases are known to contain manganese, beryllium, lead, aluminum, and arsenic. All of these can cause severe illnesses like cancer, kidney failure, and lead poisoning. So, is it wise to breathe in those poisonous fumes?
ESAB is a world leader in the production of welding and cutting equipment and consumables. Our innovative, world-renowned equipment and solutions are developed with input from our customers and built with the expertise and heritage of a global manufacturing leader. For each discipline, continuous development of methods, materials and know-how is being directed to meet the challenges posed by the diversity of industry sectors we serve. ESAB is organized to deliver efficient, high-productivity solutions to meet customer requirements in a manner that exceeds their expectations no matter the market segment. Continuous Improvement (Kaizen) Is Our Way Of Life – Set breakthrough objectives, experiment and learn every day, eliminate waste in our business processes, and benchmark the best, then better them. Living this value is done through understating that Change is a Must, and the use of Tools for Improvement. To live this value each ESAB associate fosters an environment of continuous learning employing the Colfax Business System Tools which is the basis of our culture.
Welding Supplies Direct are the UK distributor for GPPH welding tables, manufactured to the highest standards in Europe. GPPH’s range of welding benches and tables are laser cut for precision and are used in every branch of industry. These welding tables offer perfect flatness (+/- 0.5MM) & are made from 15MM thick S355J2+N grade steel. Our modular welding benches come equipped with a hole system of all sides (tabletop & all sides); the holes are 28MM in diameter and have a chamfered edge for easy tool assembly. You have the option of standard legs or castors being fitted, too.
United Kingdom market choice: Forney Industries is an American company that was founded in 1932. Forney’s 309 140 is affordable and able to weld many metals. As you’ll see below, its duty cycle is hardier than most, so you can work for much longer without breaks. It is about the same price is the Hobart 500559 Handler 140, but you’ll that the Forney is less suitable for any heavy-duty welding projects you might want to commit to. Therefore, the Forney is ideal for household use, provided that the use isn’t too demanding. It welds up to ¼ inches and includes flux core. It is capable of welding mild steel, stainless steel, aluminum, and cast iron. The Forney is able to use 4 inch and 8 inch wire spools. The cast aluminum wire feeding system ensures that the wire won’t tangle as much while it’s fed through.
Miller have spent time crafting a machine to the highest manufacturing standards that is perfect for reducing set up times and welding up to 3/8 in steel. The most notable feature is the Advanced Autoset feature which gets you welding out the box in no time. All you have to do is select your wire diameter, process type and metal thickness and you’re good to go. You can input your parameters manually if you’d prefer, but the Autoset is so advanced that you really won’t need to, the arc quality is spot on. It’s a versatile unit that is dual-voltage and is super lightweight so it’s easy to carry with the handle on the top. There are plenty of other fine details in this machine like the ‘Auto Spool Gun Detect’ which can automatically detect a spool gun and ‘Smooth-Start Technology’ to enable smooth welds. You have to pay a bit more for this welder, but you get a quality machine with fine attention to detail. See the full review here.
Once you know how you’re going to be using your MIG welder, you’ll also need to think about what kind of weld you’re going to be doing. Consider the output of the machine that’s right for the kind of materials that you’ll be working with. The thicker the metal you work with, the more power you’re going to need in your MIG welder. Additionally, if a welder needs to use more than 100 volts, it will probably need a power supply. Ultimately, one of the main concerns that you’ll need to think about when choosing the right welder is how you’re going to make sure that your machine is safe and practical. There’s more to think about with a MIG welder than how you want the weld to look after you’re finished with it. However, if you’re looking for a clean finish, bear in mind that a Pulse MIG welder can reduce the risk of burning through your chosen metals. See extra details at https://www.weldingsuppliesdirect.co.uk/.
The Autojack MIG100 has its flaws but none of them make a convincing enough case to prevent the model’s appearance on our list. It’s a good product for a lot of different reasons. First, it incorporates 4 stage power settings. Add to that the variable wire speed control and you have yourself a truly versatile tool. The internal turbo fan cooling system here is represented by an oversized blower that circulates air at a higher speed. The air vents on the sides of the model are also larger than average, a design solution that improves heat dissipation. Having said that, what we like most about this MIG welder is probably just how suitable it is for people with different levels of expertise, from beginners and hobbyists to experienced welders and professionals.