Top casting wheel manufacturer and supplier: Wheels 101: Unlock the Secrets of Purchasing Car Wheels! When purchasing Jwheel car wheels or any other brands of wheels, here are some aspects to be aware of: Vehicle suitability: Make sure the selected Jwheel wheel matches your vehicle model and specifications. Different vehicle models may have different wheel sizes, number of bolt holes and offset requirements. An unsuitable hub may cause installation problems or affect driving performance. Size and specification: Select the correct wheel size and specification for your vehicle. Wheel size affects tyre selection as well as the appearance and handling of your vehicle. Ensure that the selected wheel size matches the original wheel size or meets your needs. Read additional details at https://www.jjjwheel.com/products-21612.
We not only have the traditional low-pressure casting technology, but also have the high strength and light weight manufacturing technology of “low-pressure casting + spinning”. We always maintain various advanced technology advantages in aluminum alloy wheel manufacturing to meet customers’ needs and lead the industry development. The formula has perfect testing equipment, including material testing machine, hardness tester, solid aluminum alloy containing slag quantitative tester, X-ray diffractometer, bending fatigue tester, radial fatigue tester, biaxial fatigue tester, 13° impact tester, 30°/90° impact tester, salt spray test chamber, humidity and heat test chamber, etc., which can carry out the four major testing areas of wheels (dimensional testing, alloy material performance, reliability and safety, coating.
Mistake : take the wheel by “appearance”, ignore the hub parameters. The change of wheel hub style has an immediate effect on the appearance of the vehicle. But if only pay attention to the hub appearance did not pay attention to the hub parameters to match the original car data, it is easy to replace the hub and wing plate, calipers, shock scratch and even can not be loaded. The following important parameters of the wheel hub are related to the loading of the wheel hub, which needs special attention: Hole spacing (PCD) : must be exactly the same with the original car data. Offset: If the offset is not appropriate, the hub is easy to interfere with the shock absorber or wing plate. Center hole (CB/HUB) : If the center hole of the hub is small, it cannot be loaded at all. Size (Size) : the size of the modified hub should match the model. Too big or too small will have loading problems.
To sum up, it can be concluded that aluminum wheels are the product of “high-speed”, “energy-saving” and “modern fashion” of automobiles. With the rapid development and development of the automobile market, aluminum wheels are used to gradually replace the traditional steel ring. The trend has become more and more intense, and there is an infinitely broad market prospect. Many people usually choose a wheel that is larger than the original product when buying a new wheel. The first thing to pay attention to is that the tire and the wheel are two inseparable parts. During the modification process, try to keep the extension diameter of the tire. It is necessary to remain unchanged or to keep the changes as small as possible. One of the main reasons is that if the deviation is too large, the accuracy of the meter will be problematic. It’s not feasible to just increase the wheel size without changing the tires. For example, if the tire size of the original car is 215/60R16 (16 means 16-inch wheels), then if you change to 17-inch wheels, the new tire size should preferably be 225/55R17, or 225/50R17. Discover more info on https://www.jjjwheel.com/.
It’s no secret that a good set of wheels can make or break your vehicle’s performance. As an integral part of the ride, they influence everything from acceleration to cornering and braking ability. That being said, if you’re looking for the best possible combination of quality and performance, you owe it to yourself to check out flow formed wheels; these are some of the most advanced manufacturing processes available on the market today and they bring with them a slew of advantages over traditional cast alloy wheels. In this article, we’ll dive into what makes flow-formed wheels so great, and why you should consider investing in a set for your favorite car!
Gravity casting: Alloy aluminum is melted into liquid state and poured into the casting mold, after cooling and solidification, cleaning treatment to get the casting with predetermined shape, size and performance, after molding for mechanical processing (deburring, trimming appearance, polishing) and made. The casting wheels product needs to be molded according to the requirements, and the price is lower for mass production.
The main advantages of pure electric vehicles are that the electricity bill is cheap and the cost of car maintenance is low. For users with a small radius of daily activities, such as home travel and commuting to get off work, the advantages are obvious. Similarly, for the urban population with limited numbers and licenses It’s also a good choice. As for hybrid models like gasoline and electric vehicles, the essence is still fuel vehicles. Electricity mainly plays an auxiliary role when starting and accelerating, and it is very important for energy saving and emission reduction.
The characteristics of high thermal conductivity of aluminum alloy wheels are extremely beneficial to the heat dissipation effect of the car tires due to high-speed driving, so that they are better than steel under the same conditions. It reduces the possibility of hot tires during long-distance high-speed driving, and significantly improves the safety performance of high-speed driving. It is easier to realize the “tubeless” of modern wheels. For a tubeless wheel, the original rubber inner tube is directly replaced by an aluminum rim. If a “puncture object” such as a nail is inserted into the outer wheel while driving, as long as it is not pulled out, it will not be removed. There will be an accident that the car rolls over due to a sudden flat tire like a tire with a tube. After a tubeless wheel encounters a “puncture object”, it can generally last for at least an hour or even longer, which is particularly important for the safety of cars driving on the highway.